Kids’ 4 Foot (48″x30″) Rectangle Plywood Table by Chivari
$89.98
21″ Tall, Metal Edge, 8-10 Person, Legs Fold and Lock, Free Extended Warranty, Hotel, Church, Banquet Hall, Indoor, Commercial, Fully Assembled
In Stock
Large order?
Request a quote at checkout.
Product Documents
Kids’ 4 Foot (48″ x 30″) Rectangle Heavy Duty Plywood Folding Banquet Table with Metal Edges
The perfect table for the younger set This 4-foot Rectangle Plywood Folding Banquet Table for Kids seats up to 6 children (3 on each side), increase to 8-10 by seating 2 children on each end. Built to last and comes to you with a one-year limited warranty. But the big news is durability. This table is a trooper!
You know that durability is important. Buying replacement tables in a couple of years is not the answer. Buy our rugged rectangle children’s banquet table and watch it perform well beyond your expectations!
This children’s table features • Commercial grade, ¾” (.75”) thick plywood (fits standard table skirt clips), plus 4 Coats of Polyurethane on the top for water resistance and finished with 2 Coats of Polyurethane on the bottom.
For durability, there are 2 runners on the table bottom prevent warping and allow table stacking and Powder coated legs to prevent rusting. The Posi-lock wishbone legs fold easily but do not open during transport.
Okoume plywood (also called Gaboon, Combogala, or Okoume Mahogany) comes with a high strength-to-weight ratio, and meets strict standards for strength, durability, and resistance to decay and delamination. That’s why it’s the only Plywood we use in our banquet tables.
Our Aluminum Tough Edge Tables are made from 11 Okoume layers, 2 veneer layers plus three applied layers of polyurethane to the top surface, and two coats to the bottom! That’s 18 layers of protection! And by the way, Okoume plywood is made from sustainably grown and renewable lumber). Edges are pressure wrapped with our own high tensile strength Aluminum edge banding, applied with tons of pressure — for a lifetime of beauty and consistent performance.
– We use sustainably sourced farmed wood in all our wood products.
– We do not use old growth trees, we do not deforest.
– We plant new trees in countries devastated by deforestation.
We BOLT and GLUE our table tops to our frames.
– Our tables are stronger because every joint is extra strong . Others use a single screw to attach the table top to the framing, but our table tops are bolted to their frames, with a lock nut and washer – – and glue! And not just any bolts, we use cold-formed steel alloy
bolts to improve the physical strength and longevity of our tables.
Advanced Metal Painting Process
Others may skimp on certain processes and cut corners and still deliver a shiny product. But within months you'll notice the inferior workmanship as blemishes and even rust begins to appear. At Chivari, we never skip steps or cut corners. Our goal is simple. The highest quality products period. That's why all our metal products go through a 9 step paint adhesion process:- BARE METAL POLISHING Polishing to remove impurities and rust. This is very important. Others may skip this step to save time and labor, but it'll show up when the product begins to show signs of rust.
- DRY PROCESSING After polishing, the bare metal undergoes a drying process to remove moisture, metal's top enemy. Others may simply paint over moist metal. That simply ensures the product will form a rust pocket.
- PRIMING For maximum adhesion, a coat of film is applied to the metal surface as a primer. - This is very important.
- ELECTROSTATIC POWDER SPRAY After the primer has set, we use an electrostatic powder spraying machine to spray powder onto the metal parts. In a high-pressure electrostatic environment, the powder has a negative polarity and is sprayed onto the chair under the force of compressed air. The metal part is grounded to absorb the negative powder. This ensures a thorough and evenly distributed coat of paint across the metal surface.
- FIRST PAINT LAYER The first layer of paint is thinly covered to enhance adhesion, with a thickness of approximately 10-20 μM or Micromolar. (A micromolar refers to a concentration range often used in scientific studies, particularly in chemistry, biology, and biochemistry to describe the range of concentration of a substance in an aqueous solution.)
- SECOND PAINT LAYER The second layer provides a more thorough paint concentration with a thickness of approximately 60-80 μM.
- PAINT BAKING After the coating is completed, the metal components enter the high-temperature curing furnace (374-446 degrees Fahrenheit). The powder begins to melt and level after high-temperature and then enters the constant temperature curing stage. The constant temperature curing time is about 20 minutes.
- CURING REVIEW If the coating is thick, the powder curing time needs to be extended to ensure a smooth and even paint finish.
- QUALITY CONTOL Finally, an inspector will visually review the paint finish to guarantee it meets our quality standard. Any product not meeting or exceeding our discerning quality standard is immediately rejected.
Kids’ 4 Foot (48″ x 30″) Rectangle Heavy Duty Plywood Folding Banquet Table with Metal Edges Product Information:
- 4’ Rectangle Plywood Folding Banquet Table for Kids
- Seats 4 kids.
- Also great for a cake table with plenty of room for dessert plates.
- Commercial grade, ¾” (.75”) thick plywood (fits standard table skirt clips)
- 3 Coats of Polyurethane on the top for water resistance
- 2 Coats of Polyurethane on the bottom
- Aluminum “C” shaped protective edge that wraps around the table, not just the edge
- 2 runners on the table bottom prevent warping and allow table stacking
- Powder coated legs to prevent rusting
- Posi-lock wishbone legs that fold easily but do not open during transport.
- Leg Color: Silver
- Replaceable non-marring floor caps, 1” diameter
- 100% bolt-through construction (not screws) for leg and runner attachment.
- Capacity: 450 lbs. static load.
- Weight: 32.00 lbs. (Ultra-Strong Design)
- Length: 48.00”
- Width: 30.00”
- Height: 21.00“ (Industry Standard)
- Ships Assembled
- Warranty: 1 Year Limited Warranty
- Legs are made out of 16 Gauge Steel Tubing
- Steel Leg Wall Exceeds and Amazing 1.5mm thickness
- Steel is recyclable at metal recycling plants across the country
- Over 80% of steel joints are precision welded by robots
- Sophisticated welds are added by hand
- All welds are reviewed and certified by a master welder
- Steel legs are forged in a custom mold
- Advanced machinery provides additional curvature
- Steel is protected by Electrostatic Powder Coating to prevent scratches and rust
- Multi-Step Coating Process provides maximum protection
- Paint meets or exceeds U.S. environmental compliance standards
- Each steel leg has a static load capacity of 440 pounds (That’s a combined leg strength of 1,760 pounds.)
- The steel legs include plastic caps to protect flooring
- Tables use “Cold Heading” aka “Cold Formed” steel alloy bolts for improved physical strength and longevity
- The bolts have a tensile strength of 400N/mm2 (That’s over 8 millions pounds/sq ft)
- Tables are pressure wrapped with a lightweight aluminum alloy that provides a clean finish, but more importantly protects your tables edges for volume commercial use. (Bottom line: These tables are designed to be dropped on their sides throughout their lifetime for continuous event setup and tear down.)
RECTANGLE TABLE SEATING GUIDE
- 48 x 30-inch rectangle tables typically can seat 6 children or 6 adults
- 72 x 30-inch rectangle tables typically can seat 8 children or 6-8 adults
- 96 x 30-inch rectangle tables typically can seat 8-10 children or 8-10 adults
View our Professional Table Seating Guide to Compare Different Table Styles and available seating.
| Weight | 32 lbs |
|---|---|
| Dimensions | 48 × 30 × 2.5 in |
| Size | 48" x 30" |
| Commercial Grade | Yes |
| Plywood Table Edge Type | C Channel Metal Edge |
| Warranty | 1 Year Warranty |
You May Also Like
