8 Foot (96″x30″) Rectangle CornerMax Plywood Table by Chivari

8 Foot (96″ x 30″) Rectangle Heavy Duty Plywood Folding Banquet Table with CornerMax Edges

Even though plywood banquet tables are covered by linens, you can’t hide from the importance of buying a table that will provide the return on investment that increases your profitability. Buying replacement tables in a couple of years is not the answer. Buy our rugged rectangular banquet table and watch it perform well beyond your expectations !

Okoume plywood (also called Gaboon, Combogala, or Okoume Mahogany) comes with a high strength-to-weight ratio, and meets strict standards for strength, durability, and resistance to decay and delamination. That’s why it’s the only Plywood we use in our banquet tables.

Our Aluminum Tough Edge Tables are made from 11 Okoume layers, 2 veneer layers plus three applied layers of polyurethane to the top surface, and two coats to the bottom! That’s 18 layers of protection! And by the way, Okoume plywood is made from sustainably grown and renewable lumber). Edges are pressure wrapped with our own high tensile strength Aluminum edge banding, applied with tons of pressure — for a lifetime of beauty and consistent performance.

Our tables are stronger because every joint is extra strong. While other inferior tables use a single screw to attach the table top to the framing, our table tops are bolted to their frames with a lock nut and washer before the nut. Supports combined leg strength of 1760 pounds.

Bottom Runners
– 2 runners on the table bottom prevent warping and allow table stacking. The Posi-lock wishbone legs fold and lock easily.

Our ToughEdge
– Our reinforced ToughEdge protection strip surroundsd the entire table and can withstand years of setup and breakdown.

Bolt-Through Assembly
– Our tables are crafted using a commercial-quality Bolt-through aseembly process for ultimate strength.

High-Strength Bolts
– “Cold Formed” steel alloy bolts for physical strength and longevity.

Advanced Metal Painting Process

Others may skimp on certain processes and cut corners and still deliver a shiny product. But within months you'll notice the inferior workmanship as blemishes and even rust begins to appear. At Chivari, we never skip steps or cut corners.  Our goal is simple.  The highest quality products period.  That's why all our metal products go through a 9 step paint adhesion process:

1. BARE METAL POLISHING Polishing to remove impurities and rust.  This is very important.  Others may skip this step to save time and labor, but it'll show up when the product begins to show signs of rust.
2. DRY PROCESSING After polishing, the bare metal undergoes a drying process to remove moisture, metal's top enemy.  Others may simply paint over moist metal. That simply ensures the product will form a rust pocket.
3. PRIMING For maximum adhesion, a coat of film is applied to the metal surface as a primer. - This is very important.
4. ELECTROSTATIC POWDER SPRAY After the primer has set, we use an electrostatic powder spraying machine to spray powder onto the metal parts. In a high-pressure electrostatic environment, the powder has a negative polarity and is sprayed onto the chair under the force of compressed air. The metal part is grounded to absorb the negative powder.  This ensures a thorough and evenly distributed coat of paint across the metal surface.
5. FIRST PAINT LAYER The first layer of paint is thinly covered to enhance adhesion, with a thickness of approximately 10-20 μM or Micromolar.  (A micromolar refers to a concentration range often used in scientific studies, particularly in chemistry, biology, and biochemistry to describe the range of concentration of a substance in an aqueous solution.)
6. SECOND PAINT LAYER The second layer provides a more thorough paint concentration with a thickness of approximately 60-80 μM.
7. PAINT BAKING After the coating is completed, the metal components enter the high-temperature curing furnace (374-446 degrees Fahrenheit). The powder begins to melt and level after high-temperature and then enters the constant temperature curing stage. The constant temperature curing time is about 20 minutes.
8. CURING REVIEW If the coating is thick, the powder curing time needs to be extended to ensure a smooth and even paint finish.
9. QUALITY CONTOL Finally, an inspector will visually review the paint finish to guarantee it meets our quality standard.  Any product not meeting or exceeding our discerning quality standard is immediately rejected.

8 Foot (96″ x 30″) Rectangle Heavy Duty CornerMax Plywood Folding Banquet Table Product Information:

• 8’ Rectangle Plywood Folding Banquet Table
• Seats 8 adults
• Commercial grade, ¾” (.75”) thick plywood (fits standard table skirt clips)
• 3 Coats of Polyurethane on the top for water resistance
• 2 Coats of Polyurethane on the bottom
• Aluminum “C” shaped protective edge that wraps around the table, not just the edge
• 2 runners on the table bottom prevent warping and allow table stacking
• Powder coated legs to prevent rusting
• Posi-lock wishbone legs that fold easily but do not open during transport.
• Leg Color: Silver
• Replaceable non-marring floor caps, 1” diameter
• 100% bolt-through construction (not screws) for leg and runner attachment.
• Capacity: 670 lbs. static load.
• Weight: 60.00 lbs. (Ultra-Strong Design)
• Length: 96.00”
• Width: 30.00”
• Height: 30.00“ (Industry Standard)
• Ships Assembled
• Warranty: 1 Year Limited Warranty
• Legs are made out of 16 Gauge Steel Tubing
• Steel Leg Wall Exceeds and Amazing 1.5mm thickness
• Steel is recyclable at metal recycling plants across the country
• Over 80% of steel joints are precision welded by robots
• Sophisticated welds are added by hand
• All welds are reviewed and certified by a master welder
• Steel legs are forged in a custom mold
• Advanced machinery provides additional curvature
• Steel is protected by Electrostatic Powder Coating to prevent scratches and rust
• Multi-Step Coating Process provides maximum protection
• Paint meets or exceeds U.S. environmental compliance standards
• Each steel leg has a static load capacity of 440 pounds (That’s a combined leg strength of 1,760 pounds.)
• The steel legs include plastic caps to protect flooring
• Tables use “Cold Heading” aka “Cold Formed” steel alloy bolts for improved physical strength and longevity
• The bolts have a tensile strength of 400N/mm2 (That’s over 8 millions pounds/sq ft)
• Tables are pressure wrapped with a lightweight aluminum alloy that provides a clean finish, but more importantly protects your tables edges for volume commercial use.  (Bottom line:  These tables are designed to be dropped on their sides throughout their lifetime for continuous event setup and tear down.)

Protective CornerMax High-Quality Polymer Corner Guards

Our CornerMax line of plywood heavy-duty banquet tables comes fortified with the industry-leading CornerMax corner protection system, ensuring unbeatable resilience against the rigors of setup, tear-down, and relentless use.

How CornerMax protects your investment

Impact Absorption: During transportation, setup, and teardown, banquet tables are prone to bumps, knocks, and collisions. High-quality polymer corner guards act as shock absorbers, cushioning the corners of the table from direct impacts. This helps prevent damage such as chips, dents, and cracks, extending the lifespan of the table.

Structural Integrity: The corners of a table are vulnerable areas where damage is most likely to occur. By reinforcing these corners with polymer guards, the overall structural integrity of the table is enhanced. This ensures that the table remains stable and sturdy, even after prolonged use and frequent handling.

Protection for Surrounding Objects: In busy event settings, banquet tables are often placed in close proximity to other furniture, walls, and decorative elements. Protective corner guards help prevent accidental damage to surrounding objects by minimizing the risk of scratches, scuffs, and other surface imperfections caused by sharp corners.

Aesthetic Appeal: Tables with damaged corners can detract from the overall aesthetic of an event space or venue. By maintaining the appearance of the corners with high-quality polymer guards, the table retains its professional and polished look, enhancing the overall presentation of the event.

Protective corner guards made of high-quality polymer are essential for plywood banquet tables to ensure durability, structural integrity, protection for surrounding objects, and aesthetic appeal.

RECTANGLE TABLE SEATING GUIDE

• 48 x 30-inch rectangle tables typically can seat 6 children or 6 adults
• 72 x 30-inch rectangle tables typically can seat 8 children or 6-8 adults
• 96 x 30-inch rectangle tables typically can seat 8-10 children or 8-10 adults

 

 

View our Professional Table Seating Guide to Compare Different Table Styles and available seating.