8 Foot (96″x 36″) Rectangle Heavy Duty Plywood Table by Chivari, Metal Edge, 10-12 Person, Legs Fold and Lock, Free Extended Warranty, Hotel, Church, Banquet Hall, Indoor, Commercial, Fully Assembled

8 Foot (96″ x 36″) Rectangle Heavy Duty Plywood Folding Banquet Table 

Even though plywood banquet tables are covered by linens, you can’t hide from the importance of buying a table that will provide the return on investment that increases your profitability. Buying replacement tables in a couple of years is not the answer. Buy our rugged tables and watch then perform well beyond your expectations!

This table is 100% professional, with Commercial grade, ¾” (.75”) thick plywood (fits standard table skirt clips) with 11 layers of premium wood, 2 layers of superior grade veneer on top and bottom, and 5 Coats of Polyurethane.

This table features 16” Gauge Steel Legs — Designed to last — with 100% bolt-through construction (not screws) for leg and runner attachment.

Okoume plywood (also called Gaboon, Combogala, or Okoume Mahogany) comes with a high strength-to-weight ratio, and meets strict standards for strength, durability, and resistance to decay and delamination. That’s why it’s the only Plywood we use in our banquet tables.

Our Aluminum Tough Edge Tables are made from 11 Okoume layers, 2 veneer layers plus three applied layers of polyurethane to the top surface, and two coats to the bottom! That’s 18 layers of protection! And by the way, Okoume plywood is made from sustainably grown and renewable lumber). Edges are pressure wrapped with our own high tensile strength Aluminum edge banding, applied with tons of pressure — for a lifetime of beauty and consistent performance.

• 8’ Rectangle Extra Wide (36”) Plywood Folding Banquet Table
• 36” is wider than the standard 30” width; more room for decoration and for dining
• Seats 8 adults
• Commercial grade, ¾” (.75”) thick plywood (fits standard table skirt clips)
• 3 Coats of Polyurethane on the top for water resistance
• 2 Coats of Polyurethane on the bottom
• Aluminum “C” shaped protective edge that wraps around the table, not just the edge
• 2 runners on the table bottom prevent warping and allow table stacking
• Powder coated legs to prevent rusting
• Posi-lock wishbone legs that fold easily but do not open during transport.
• Leg Color: Silver
• Replaceable non-marring floor caps, 1” diameter
• 100% bolt-through construction (not screws) for leg and runner attachment.
• Capacity: 690 lbs. static load.
• Weight: 67.00 lbs. (Ultra-Strong Design)
• Length: 96.00”
• Width: 36.00” (30” is industry standard)
• Height: 30.00“ (Industry Standard)
• Ships Assembled
• Warranty: 2 Year Limited Warranty, plus a 2 Year Extended Warranty Absolutely Free
• Legs are made out of 16 Gauge Steel Tubing
• Steel Leg Wall Exceeds and Amazing 1.5mm thickness
• Steel is recyclable at metal recycling plants across the country
• Over 80% of steel joints are precision welded by robots
• Sophisticated welds are added by hand
• All welds are reviewed and certified by a master welder
• Steel legs are forged in a custom mold
• Advanced machinery provides additional curvature
• Steel is protected by Electrostatic Powder Coating to prevent scratches and rust
• Multi-Step Coating Process provides maximum protection
• Paint meets or exceeds U.S. environmental compliance standards
• Each steel leg has a static load capacity of 440 pounds (That’s a combined leg strength of 1,760 pounds.)
• The steel legs include plastic caps to protect flooring
• Tables use “Cold Heading” aka “Cold Formed” steel alloy bolts for improved physical strength and longevity
• The bolts have a tensile strength of 400N/mm2 (That’s over 8 millions pounds/sq ft)
• Tables are pressure wrapped with a lightweight aluminum alloy that provides a clean finish, but more importantly protects your tables edges for volume commercial use.  (Bottom line:  These tables are designed to be dropped on their sides throughout their lifetime for continuous event setup and tear down.)

Maintenance and Care Instructions

1. Storage:
– When not in use, store in a cool, dry place away from direct sunlight.
– If possible, keep it in a protective case or cover when not in use.

2. Cleaning:
– Clean regularly with a soft, damp cloth to remove dirt and debris.
– For tougher stains, use a mild soap solution and rinse thoroughly.
– Avoid abrasive cleaners or scrubbers that may scratch the surface.

3. Sun Protection:
– Limit prolonged exposure to direct sunlight to prevent color fading.
– If used outdoors, place in shaded areas when possible.

4. Temperature Considerations:
– While the furniture is weatherproof, avoid extreme temperature fluctuations.
– In very hot weather, provide shade or bring indoors during peak heat hours.

5. Inspection:
– Regularly inspect for any signs of wear, cracks, or damage.
– If you notice any issues, address them promptly to prevent further deterioration.

6. Handling:
– Despite its durability, handle with care to avoid unnecessary impacts or drops.
– Use both hands when moving or repositioning furniture.

7. Avoid Harsh Chemicals:
– Do not use solvents, bleach, or other harsh chemicals for cleaning or maintenance.

By following these care instructions, you can help maintain the appearance and longevity of your investment, minimizing color fading and ensuring your item’s durability in various weather conditions.