4 Foot (48″) Round Heavy Duty Plywood Folding Banquet Table by Chivari

4 Foot (48″) Round Heavy Duty Plywood Folding Banquet Table with Metal Edges

Even though plywood banquet tables are covered by linens, you can’t hide from the importance of buying a table that will provide the return on investment that increases your profitability. Buying replacement tables in a couple of years is not the answer. Buy our rugged tables and watch it perform well beyond your expectations.

Okoume plywood (also called Gaboon, Combogala, or Okoume Mahogany) comes with a high strength-to-weight ratio, and meets strict standards for strength, durability, and resistance to decay and delamination. That’s why it’s the only Plywood we use in our banquet tables.

Our Aluminum Tough Edge Tables are made from 11 Okoume layers, 2 veneer layers plus four applied layers of polyurethane to the top surface, and two coats to the bottom! That’s 19 layers of protection! And by the way, Okoume plywood is made from sustainably grown and renewable lumber). Edges are pressure wrapped with our own high tensile strength Aluminum edge banding, applied with tons of pressure — for a lifetime of beauty and consistent performance.

We Bolt Our Table Tops To Their Frames (others don’t)

Our tables are stronger because every joint is extra strong. While other inferior tables use a single screw to attach the table top to the framing, our table tops are bolted to their frames with a lock nut and washer before the nut. Supports combined leg strength of 1760 pounds.

Bottom Runners
– 2 runners on the table bottom prevent warping and allow table stacking. The Posi-lock wishbone legs fold and lock easily.

Our ToughEdge
– Our reinforced ToughEdge protection strip surrounds the entire table and can withstand years of setup and breakdown.

Bolt-Through Assembly
– Our tables are crafted using a commercial-quality Bolt-through assembly process for ultimate strength.

High-Strength Bolts
– “Cold Formed” steel alloy bolts for physical strength and longevity.

Product Information:

• 4’ Round Plywood Folding Banquet Table
• Seats 5 adults
• Great for a cake table with plenty of room for dessert plates.
• Capacity: 450 lb. static load
• Commercial grade, ¾” (.75”) thick plywood (fits standard table skirt clips)
• 4 Coats of Polyurethane on the top for water resistance
• 2 Coats of Polyurethane on the bottom
• Aluminum “C” shaped protective edge that wraps around the table, not just the edge
• 2 runners on the table bottom prevent warping and allow table stacking
• Powder coated legs to prevent rusting
• Posi-lock wishbone legs that fold easily but do not open during transport.
• Leg Color: Silver
• Replaceable non-marring floor caps, 1” diameter
• 100% bolt-through construction (not screws) for leg and runner attachment.
• Capacity: 450 lbs. static load.
• Weight: 40.00 lbs. (Ultra-Strong Design)
• Width: 48.00” (Diameter)
• Height: 30.00“ (Industry Standard)
• Ships Assembled
• Warranty: 2 Year Limited Warranty and 2 Year Extended Warranty Absolutely Free
• Legs are made out of 16 Gauge Steel Tubing
• Steel Leg Wall Exceeds and Amazing 1.5mm thickness
• Steel is recyclable at metal recycling plants across the country
• Over 80% of steel joints are precision welded by robots
• Sophisticated welds are added by hand
• All welds are reviewed and certified by a master welder
• Steel legs are forged in a custom mold
• Advanced machinery provides additional curvature
• Steel is protected by Electrostatic Powder Coating to prevent scratches and rust
• Multi-Step Coating Process provides maximum protection
• Paint meets or exceeds U.S. environmental compliance standards
• Each steel leg has a static load capacity of 440 pounds (That’s a combined leg strength of 1,760 pounds.)
• The steel legs include plastic caps to protect flooring
• Tables use “Cold Heading” aka “Cold Formed” steel alloy bolts for improved physical strength and longevity
• The bolts have a tensile strength of 400N/mm2 (That’s over 8 millions pounds/sq ft)
• Tables are pressure wrapped with a lightweight aluminum alloy that provides a clean finish, but more importantly protects your tables edges for volume commercial use.  (Bottom line:  These tables are designed to be dropped on their sides throughout their lifetime for continuous event setup and tear down.)

ROUND TABLE SEATING GUIDE

• 48-inch round tables typically can seat 6 children or 4-6 adults
• 60-inch round tables typically can seat 10 children or 8-10 adults
• 66-inch round tables typically can seat 8-10 adults
• 72-inch round tables typically can seat 10-12 adults

View our Professional Table Seating Guide to Compare Different Table Styles and available seating.

Maintenance and Care Instructions

1. Storage:
– When not in use, store in a cool, dry place away from direct sunlight.
– If possible, keep it in a protective case or cover when not in use.

2. Cleaning:
– Clean regularly with a soft, damp cloth to remove dirt and debris.
– For tougher stains, use a mild soap solution and rinse thoroughly.
– Avoid abrasive cleaners or scrubbers that may scratch the surface.

3. Sun Protection:
– Limit prolonged exposure to direct sunlight to prevent color fading.
– If used outdoors, place in shaded areas when possible.

4. Temperature Considerations:
– While the furniture is weatherproof, avoid extreme temperature fluctuations.
– In very hot weather, provide shade or bring indoors during peak heat hours.

5. Inspection:
– Regularly inspect for any signs of wear, cracks, or damage.
– If you notice any issues, address them promptly to prevent further deterioration.

6. Handling:
– Despite its durability, handle with care to avoid unnecessary impacts or drops.
– Use both hands when moving or repositioning furniture.

7. Avoid Harsh Chemicals:
– Do not use solvents, bleach, or other harsh chemicals for cleaning or maintenance.

By following these care instructions, you can help maintain the appearance and longevity of your investment, minimizing color fading and ensuring your item’s durability in various weather conditions.